SKU: N/AThis site contains affiliate links for which we may be compensated
Home & Garden / Major Appliances / Major Appliances Parts & Accessories / Washer & Dryer Parts
Order
the BetterVent Indoor Lint Trap kit and save! Includes the BetterVent
Indoor Lint Trap and a package of 6 replacement filters. Don't get
caught short with no replacement filters The BetterVent
is a great option if your dryer can't be vented to the outside. An
indoor lint trap filter captures any lint to prevent it from flying
around your home. The BetterVent is great because it has a two filter system in an air
tight chamber and doesn't need water. The benefit is it is better at
trapping small lint particles and prevents them from flying around your
home. An added benefit is the energy from the warm dryer stays in your home. Installs on a wall close to your dryer. The indoor lint trap is made in the United States. Cannot be used with a gas dryer This kit includes 6 replacement filters. These are the manufacturer's
original polyester filters. Don't be fooled by imposters. Each filter
is 7" x 8.25". Features:
Catches fine particles of lint from the dryer
Cleaner air
Easy maintenance
No water required
Double filter System
Made in the United States
Specifications:
Dryer Type: Electric Clothes Dryers Only (Type 1)
Dryer Duct Size: 4” (102mm) in Diameter
Airflow: Approximately 100 cu/ft. per minute
Size: 12”h x 10”w x 5”d
Weight: about 2lbs.
Color: Grey and Black
Material: ABS Plastic
Made in the USA
Set of 6 replacement filters
Cannot be used with a gas dryerHow often will I need to clean and change the filter on my BetterVent? It all depends on the type of laundry you are drying and how often you
use your dryer. In a house, with two people and few loads per week, you
may go a month or so between cleaning or replacing the polyester filter.
It is recommended to clean the stainless pre-filter at least every four
or five loads. As you use your BetterVent you will know how often your
filters will need to be cleaned and replaced. To extend the life of your
filter you can vacuum the blue side of the filter multiple times before
you will need to replace it with a new one. Installation Instructions Introduction Your BetterVent should be installed at a height co nvenient to the operator. Your BetterVent should be located at a position th at will be easy for the user to access, clean and maintain. We recommend that the exhaust line be any UL listed dryer transition duct. The connection at the back of the dryer may be mad e with a metal 90 degree fitting known as a “close elbow” to prevent the transition hose from being cr ushed against the wall. Vinyl flex ducts should never be used. Installation 1. Select a wall close to the dryer which allows yo u to meet the recommendations above. 2. Release the door latches and open the door. Stea dy the BetterVent® against the wall and mark the screw locations. 3. If the wall is concrete or plaster, drill a 1/4” hole at screw locations 1 1/2” deep and tap in the plastic anchors. 4. If the wall is sheetrock, drill a 3/16” hole and tap in the plastic anchors. 5. Position the BetterVent to align with the anchor s and screw to the wall. Installing the exhaust line 1. Determine if your dryer has a sidewall option fo r ducting. Choose a connection that will provide th e shortest path. This might be the back of the dryer cabinet or sidewall. 2. If the connection is at the back of the dryer ca binet, slide the dryer away from the wall and insta ll a metal 90 degree fitting (close elbow). 3. Stretch out a small portion of the metal flex du ct and make connection to the close elbow. Secure w ith hose clamp. 4. Carefully lead the flex towards your BetterVent® and make connection. Secure with hose clamp. 5. Your BetterVent® is now installed and ready for calibration. Enjoy! Calibrating the Safety Exhaust Flap The Safety Exhaust Flap (SEF) is designed to alert the homeowner that the filter is completely loaded and needs to be cleaned or replaced. It remains in the open position until reset by the user. The SEF need s to be calibrated by the homeowner using weights (included ) to match the exhaust output of the dryer. The BetterVent® comes with one 1/2” wide and three 3/4” wide, peel and stick strips. You will use the strips to weight the SEF in order to keep it closed. This procedure is quite simple and should take just a few minutes. 1. Make sure that you have cleaned the screen insid e your dryer. This should be done after each dryer load as recommended by the manufacturer. 2. Take the 60 mil weight, peel off the brown paper and attach it to the inside of the Safety Exhaust Flap. The 60 mil weight is the smaller, thicker one inclu ded in your accessory pack. 3. Find a book, notebook, clipboard or magazine. Tu rn your dryer on and cover about 25% of the door. 4. What should happen now is that either your Safet y Exhaust Flap will open or stay closed. If it stay s closed, continue to move upwards until the flap ope ns. 5. If it opens before you reach 80% coverage of the door, add another peel and stick weight to the top of the Safety Exhaust Flap and do the test again. Cont inue to add weights, as needed, until Safety Exhaust Flap opens at 80% coverage. Most users do n ot have to add more than 2 weights. Operating Instructions Your BetterVent® has been designed for easy mainten ance. It is necessary that the user clean and servi ce the BetterVent® as part of a regular laundry room routi ne. Your BetterVent® contains a screen filter and a pol yester filter. The screen filter collects lint, pet hair and other large debris and serves to extend the life of the p olyester filter. Filters are installed with blue side to the INSIDE of the vent and placed between the removable screen and the door. You should see the white side of the filter w hen the door is closed. The polyester media filter is specifically designed to keep fine lint dust from entering the indoor en vironment. Cleaning Cleaning the screen filter is easy. Simply release the door latches, lower the door, and (while leavin g the screen in place) reach in and remove the accumulate d lint with a sweeping motion of the hand. Clean the screen frame every 3-5 dryer loads. The polyester filter can be lightly vacuumed or rep laced every 5-8 dryer loads. Do not wash. Your polyester filter is inserted with the white si de facing out towards the room when the door of the BetterVent® is closed.
Returns Accepted for this item if it's within 30 Days