You must have javascript enabled to use replacementfilter.org !

For Shark Navigator Deluxe Upright Nv42, Nv44, Nv46, Vacuum Filter

Replacement

USD $13.60

Condition : New

Free Shipping

{{variant_type_name}} :
eBay
SKU: U2(1)CF-42 LJY This site contains affiliate links for which we may be compensated Home & Garden / Household Supplies & Cleaning / Vacuum Cleaner Parts

Notify me when the price drops

We will email you if we find a lower price on this product!

Target price (USD) $
For Shark Deluxe Filter Kit.
Fits Euro Pro Shark Navigator Upright Models UV410 Series, NV36A, NV36, NV44, NV46C, NV46, NV42
The kit includes 2 washable front foam filters and 1 rear motor filter. Fit Models:
For Shark Navigator Deluxe Upright Corded Bagless Vacuum NV42 NV44.
For Shark Navigator Swivel Plus Upright Vacuum NV46.
For Shark Navigator Deluxe Vacuum UV402.
Part number XFF36, EU-18061
To replace the pre-motor filter:
1. Remove the dust cup.
2. Remove the filter frame from the top of the motor base.
3. Remove the foam filter from the filter frame.
4. Turn the filter frame upside down and carefully pull out the felt filter
5. Replace the felt and foam filter in the XFF36 kit you just purchased
6. Insert the foam filter into the top of the filter frame. When replacing a felt filter, make sure that the felt portion of the filter is facing outwards.
7. Reinstall the filter frame to the motor base and replace the dust cup.
8. After every 3-4 vacuum uses, remove the foam and felt filters and rinse thoroughly with warm water until the water is clear.
Do not put the filter in the washing machine or dishwasher.
NOTE: The material in the filter will discolor over time. This is normal and does not affect filter performance.
9. Squeeze out excess water and allow to air dry for at least 24 hours before replacing. Do not use a hair dryer or other heat to dry.
10. Put the filter back in place after 100% dry. Follow steps 4 to 7 To change the post-motor filter: 1. Remove the filter cover from the front of the vacuum by pulling up on the tab and pulling the cover away from the vacuum. 2. Take out the filter by pulling it straight out. Replace it with the filter have a notch on the top. 3. Replace the cover by inserting the two tabs into the holes at the bottom and then swinging the cover up until it clicks into place. 4. After every 3-4 vacuum uses, take out the filter, turn it over so that the dirty side is on the bottom and vigorously tap it clean against a garbage can to remove any dust. 5. Wash the filter under the tap using lukewarm water with the dirty side face down until the water runs clear. DO NOT put the filter in the washing machine or dishwasher. NOTE: The material in the filter will discolor over time. This is NORMAL and will not affect the performance of the filter. 6. Allow the filter to air dry for 24 hours. Do not use a hair dryer or other heating methods to dry. 7. Once the filter is dry, replace it back into the vacuum. Located in: Flushing, New York,11354 United States
For Shark Navigator Deluxe Upright NV42, NV44, NV46,  Vacuum Filter Replacement
moen 9601 choiceflo 9600 replacement filter | drinking water replacement filter | whcf gd05 replacement filter | filter queen replacement filters | coffee pod replacement filters for coffee pod brewers
See more
Price type
IN STOCK OUT STOCK